39BYG NEMA16 position control stepper motor hybrid stepper motor
39mm 2 phase step motor 1.8° per step
Our stepper motor series are: 20mm, 28mm, 35mm, 39mm, 42mm, 57mm,
60mm, 86mm, 110mm, 130mm. Two-phase, three-phase and four-phase
hybrid stepping motor. The DC brushless motor range includes 42BLS,
57BL(S), 86BLS, and matching DC brushless drivers.
Therefore, the products are in line with ROHS requirements.
Applications include robotics, industrial electronic automation
equipment, medical equipment, advertising equipment, printing
equipment, textile machinery and so on. Has been exported to the
United States, Germany, Italy, Spain, the United Kingdom, Mexico,
Brazil and other more than 20 countries.
Mechanical Dimension:MM
Typical Applications
- 3D Printer
- Monitoring Equipment
- Medical Machinery
- Vending Machine
- Engineering Vehicle
- CNC Engraving Machine
- ATM Machine
Specifications
Standard Operating Conditions
| No. | ITEM | SPEC. | REMARKS |
| 1 | Voltage | 12 VDC | |
| 2 | Source Voltage | 24 VDC | Indicates the voltage that the power supplier applys to the driver
circuit.
It is same as the rated voltage when motor is drived on a constant
voltage model. |
| 3 | Phase | 4 Phase | |
| 4 | Rated Current | 0.2 A /Phase | Peak value when microstep |
| 5 | Exciting mode | Unipolar | Refer to drive circuit |
| 6 | Step angle | 1.8 deg | ±7％ |
| 7 | Rotation | CW/CCW | |
Electrical Characteristics
| No. | ITEM | SPEC. | TEST CONDITION | REMARKS |
| 1 | Resistance | 60±10％Ω | At 20℃ | Each phase |
| 2 | Inductance | 24±20％mH | At 1Hz,0.3 Vrms | Each phase(Ref.) |
| 3 | Holding Torque | 500 g.cm min | | |
| 4 | Detent Torque | 150 g.cm max | | |
| 5 | Step Angle Accuary | ±5％ | Constant Current Driver/
12V/Two Phase on/Rated current/Speed:1pps | |
| 6 | Slew Rate with no load | —— | Source Voltage 24V/
Rated current//Half step | |
| 7 | Pull-in rate with no load | —— | Source Voltage 24V/
Rated current//Half step | |
| 8 | Dielectric Strength | 1 mA max. | 600VAC,1 second | |
| 9 | Insulation Resistance | 100 MΩmin. | 500VDC | Between coil and endbells |
| 10 | Insulation class | Coil class B | | |
| 11 | Temperature rise | less than 80℃ | | |
Mechanical Characteristics
| No. | ITEM | SPEC. |
| 1 | Outline Dimentions | See the technical drawing |
| 2 | Rotor Inertia | 11 g.cm2 |
| 3 | Weight | About 0.11 kg |
| 4 | End play of the shaft | 0.08mm@500g.f |
| 5 | Radial play of the shaft | 0.02mm@500g.f |
Environmental Performance
| No. | ITEM | OPERATING |
| 1 | Operation environment conditions | Ambient temperature | -20℃～+50℃ |
| | Ambient Humidity | 15～85%RH No condensation |
| 2 | Storage environment conditions | Ambient temperature | -30℃～+70℃ |
| | Ambient Humidity | 15～85%RH No condensation |
The above products are only representative models, we can customize
the products according to customer requirements. Includes the length and diameter of the shaft.Our company can also
provide OEM services.
Product Detail Presentation
